Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Corolla
    4. : Antenna

Toyota Corolla - Antenna

Toyota Corolla (2000-2007 / MK 2)
Replacement of the Toyota Corolla antenna
Below we will see step-by-step instructions on how to disassemble and replace the antenna of the Toyota Corolla. First, let's remove the two plastic clips on …read all…
Posted on 9 November 2023 by ScegliAuto
Toyota Corolla (1995-2002 / MK 1)
How do you replace the Toyota Corolla antenna?
In order to replace the Toyota Corolla antenna, you need to unscrew the two screws that secure the panel located in the upper part of the driver's door pillar. …read all…
Posted on 15 October 2022 by ScegliAuto
Toyota Corolla (2006-2013 / MK 3)
How to change antenna on Corolla
Let's see how to remove the antenna on Toyota Corolla. After purchasing the new antenna (with size and thread identical to the original), we unscrew the same …read all…
Posted on 20 December 2023 by ScegliAuto
Cigarette Lighter (6) Airbags (2) Alternator (1) Loudspeaker (1) Antenna (3) Car stereo (4) Battery (16) Coil (1) Gearbox (1) Spark plugs (1) Bodywork (1) Glove box (2) Control unit (1) Key (26) Locking the trunk (1) Timing belt (6) V-belt (3) Air conditioning (1) Air conditioning controls (1) -board computer (14) Checks and maintenance (89) Dashboard (4) Bearing (1) Brake discs (1) Headlight (9) Tail light (3) Air filter (8) Cabin air filter (10) Petrol filter (1) Diesel filter (4) Clutch (1) Injectors (2) Window lift switch (1) Xenon headlight kit (1) Light bulb (8) Side turn signal light bulb (2) Headlight bulb (9) Rear light bulb (8) Interior lights ceiling light bulb (6) Antifreeze liquid (1) License plate light (3) Handle (5) Engine (1) Starter motor (5) Brake oil (1) Engine oil (7) Door panel (6) Front bumper (7) Rear bumper (1) Brake pads (4) Tires (9) Gear Shift Knob (9) Pump (2) Fuel pump (15) Door (1) Window lift button (1) Instrument cluster (19) Wheel (1) Fuse box (63) Seat (15) Lock (3) Outside rearview mirror (8) Manufacturer's coat of arms (1) Windscreen wipers (4) Thermostat (1) EGR valve (1) Interior blower (3) Side window (2) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos