Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Antenna on a Toyota Corolla

Model: Toyota Corolla MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Antenna

See other generations:
Video tutorial

To replace the antenna on a Toyota Corolla, you need to unscrew the two screws that secure the panel at the top of the driver's door pillar. Once these screws are loosened, you can remove the small panel and pull out the underlying antenna.

After the antenna is removed, disconnect it completely so that you can insert the new replacement part; this must be properly connected to the relevant cables before being placed back in its housing and secured with the panel.


Updated on 19 June 2026 by ScegliAuto


Related tutorials

How to Change the Aerial on a Corolla
How to Change the Aerial on a Corolla
Toyota Corolla (2006-2013 / MK 3) Let's see how to remove the aerial on a Toyota Corolla. After purchasing the new aerial (with the same size and thread as the original), unscrew the …
Replacing the Antenna on a Toyota Corolla
Replacing the Antenna on a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) Here are step-by-step instructions on how to remove and replace the antenna on a Toyota Corolla. First, remove the two plastic clips on the headlinin…
Removing the Radio from the Dashboard of a Toyota Corolla
Removing the Radio from the Dashboard of a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) To remove the radio from a Toyota Corolla, see how to take it out from inside the car's dashboard. Remove the cover under the radio where the air kno…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos