Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Antenna on a Toyota Corolla

Model: Toyota Corolla MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Antenna

See other generations:
Video tutorial

Here are step-by-step instructions on how to remove and replace the antenna on a Toyota Corolla. First, remove the two plastic clips on the headlining at the rear; then remove the door seal and detach the cover of the pillar, as shown in the video.

At this point, disconnect the antenna cable and unscrew the base nut to remove it along with the antenna from the outside; then replace the antenna and its base with the new one, routing the new cable along the back of the pillar, following the video tutorial to the end!


Updated on 25 August 2026 by ScegliAuto


Related tutorials

How to Change the Aerial on a Corolla
How to Change the Aerial on a Corolla
Toyota Corolla (2006-2013 / MK 3) Let's see how to remove the aerial on a Toyota Corolla. After purchasing the new aerial (with the same size and thread as the original), unscrew the …
How to Replace the Antenna on a Toyota Corolla
How to Replace the Antenna on a Toyota Corolla
Toyota Corolla (1995-2002 / MK 1) To replace the antenna on a Toyota Corolla, you need to unscrew the two screws that secure the panel at the top of the driver's door pillar. Once the…
Removing the Radio from the Dashboard of a Toyota Corolla
Removing the Radio from the Dashboard of a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) To remove the radio from a Toyota Corolla, see how to take it out from inside the car's dashboard. Remove the cover under the radio where the air kno…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos