Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Aerial on a Corolla

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Antenna

See other generations:
Video tutorial

Let's see how to remove the aerial on a Toyota Corolla. After purchasing the new aerial (with the same size and thread as the original), unscrew the old one by hand until it is completely detached from its base.

Take the new aerial and screw it (until the pin is fully tightened) into the plastic base on the roof of your car. Finally, check the proper functioning of the aerial by turning on the car radio and receiving channels. Install either an original aerial or a generic brand, short or long, based on your preferences.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

Toyota Corolla (2000-2007 / MK 2) Here are step-by-step instructions on how to remove and replace the antenna on a Toyota Corolla. First, remove the two plastic clips on the headlinin…
Toyota Corolla (1995-2002 / MK 1) To replace the antenna on a Toyota Corolla, you need to unscrew the two screws that secure the panel at the top of the driver's door pillar. Once the…
Toyota Corolla (2000-2007 / MK 2) To remove the radio from a Toyota Corolla, see how to take it out from inside the car's dashboard. Remove the cover under the radio where the air kno…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos