Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Corolla
    4. : Brake pads

Toyota Corolla - Brake pads

Toyota Corolla (2006-2013 / MK 3)
How to replace front brake pads on Toyota Corolla
In this guide, let's see together the instructions on how to disassemble and replace the front brake pads of the Toyota Corolla, in simple and quick steps. …read all…
Posted on 26 May 2023 by ScegliAuto
Toyota Corolla (1995-2002 / MK 1)
How do i replace the front brake pads of the Toyota Corolla?
In order to replace the front brake pads of the Toyota Corolla you have to go and lift the car so that you can loosen the bolts that fix the corresponding …read all…
Posted on 4 September 2022 by ScegliAuto
Toyota Corolla (2006-2013 / MK 3)
How do i replace the front brake pads of the Toyota Corolla?
In order to replace the front brake pads of the Toyota Corolla you have to go and lift the car with a jack, so that the corresponding wheel is not in contact …read all…
Posted on 15 November 2022 by ScegliAuto
Toyota Corolla (2000-2007 / MK 2)
Replacement brake pads and discs
Disassemble the wheel and carefully disassemble the caliper by removing the two stops with a ratchet wrench. Remove the brake fluid pipe that feeds the piston. …read all…
Posted on 26 June 2023 by ScegliAuto
Cigarette Lighter (6) Airbags (2) Alternator (1) Loudspeaker (1) Antenna (3) Car stereo (4) Battery (16) Coil (1) Gearbox (1) Spark plugs (1) Bodywork (1) Glove box (2) Control unit (1) Key (26) Locking the trunk (1) Timing belt (6) V-belt (3) Air conditioning (1) Air conditioning controls (1) -board computer (14) Checks and maintenance (89) Dashboard (4) Bearing (1) Brake discs (1) Headlight (9) Tail light (3) Air filter (8) Cabin air filter (10) Petrol filter (1) Diesel filter (4) Clutch (1) Injectors (2) Window lift switch (1) Xenon headlight kit (1) Light bulb (8) Side turn signal light bulb (2) Headlight bulb (9) Rear light bulb (8) Interior lights ceiling light bulb (6) Antifreeze liquid (1) License plate light (3) Handle (5) Engine (1) Starter motor (5) Brake oil (1) Engine oil (7) Door panel (6) Front bumper (7) Rear bumper (1) Brake pads (4) Tires (9) Gear Shift Knob (9) Pump (2) Fuel pump (15) Door (1) Window lift button (1) Instrument cluster (19) Wheel (1) Fuse box (63) Seat (15) Lock (3) Outside rearview mirror (8) Manufacturer's coat of arms (1) Windscreen wipers (4) Thermostat (1) EGR valve (1) Interior blower (3) Side window (2) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos