Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Corolla
  6. : Car stereo

Toyota Corolla - Car stereo

Toyota Corolla (2000-2007 / MK 2)
How to replace the radio in a Toyota Corolla?

In this tutorial, we can see how to replace the car radio in a Toyota Corolla, a very simple and quick operation. First of all, make sure that the key is not …read all…
Posted on 5 May 2023 by ScegliAuto
Toyota Corolla (2000-2007 / MK 2)
How do I replace the car radio in my Toyota Corolla?

To replace the car radio in your Toyota Corolla you won't need any special tools, and it is an operation that you can easily carry out in your garage. First we …read all…
Posted on 3 December 2022 by ScegliAuto
Toyota Corolla (2013-2019 / MK 4, E170, E160)
Disassembly of the Toyota Corolla stock car radio

Let's see in this guide the main steps that will allow us to disassemble and replace the original Toyota Corolla car stereo. First we get on board the car and …read all…
Posted on 7 April 2024 by ScegliAuto
Toyota Corolla (2000-2007 / MK 2)
Removing the car radio from the dashboard of a Toyota Corolla

Let's disassemble the car radio on a Toyota Corolla, let's see how it disassembles from inside the car dashboard. We remove the cover under the car radio where …read all…
Posted on 19 December 2023 by ScegliAuto

Cigarette Lighter (6) Airbags (2) Alternator (1) Loudspeaker (1) Antenna (3) Car stereo (4) Battery (16) Coil (1) Gearbox (1) Spark plugs (1) Bodywork (1) Glove box (2) Control unit (1) Key (26) Locking the trunk (1) Timing belt (6) V-belt (3) Air conditioning (1) Air conditioning controls (1) -board computer (14) Checks and maintenance (89) Dashboard (4) Bearing (1) Brake discs (1) Headlight (9) Tail light (3) Air filter (8) Cabin air filter (10) Petrol filter (1) Diesel filter (4) Clutch (1) Injectors (2) Window lift switch (1) Xenon headlight kit (1) Light bulb (8) Side turn signal light bulb (2) Headlight bulb (9) Rear light bulb (8) Interior lights ceiling light bulb (6) Antifreeze liquid (1) License plate light (3) Handle (5) Engine (1) Starter motor (5) Brake oil (1) Engine oil (7) Door panel (6) Front bumper (7) Rear bumper (1) Brake pads (4) Tires (9) Gear Shift Knob (9) Pump (2) Fuel pump (15) Door (1) Window lift button (1) Instrument cluster (19) Wheel (1) Fuse box (63) Seat (15) Lock (3) Outside rearview mirror (8) Manufacturer's coat of arms (1) Windscreen wipers (4) Thermostat (1) EGR valve (1) Interior blower (3) Side window (2) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos