Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Corolla
  6. : Engine oil

Toyota Corolla - Engine oil

Toyota Corolla (2013-2019 / MK 4, E170, E160)
How to reset the oil service light on the Toyota Corolla?

In this tutorial we can see how to reset the oil service in the Toyota Corolla, an extremely simple and quick operation, to be performed only after completing …read all…
Posted on 6 March 2024 by ScegliAuto
Toyota Corolla (2013-2019 / MK 4, E170, E160)
How to reset the oil service in the Toyota Corolla?

In this tutorial, we can see how to reset the oil service in the Toyota Corolla, an extremely simple and quick operation to be performed only after completing …read all…
Posted on 11 February 2024 by ScegliAuto
Toyota Corolla (2000-2007 / MK 2)
How to replace the engine oil and oil filter of the Toyota Corolla VVT-I.

Today's DIY steps will show us how to perform regular maintenance on a Toyota Corolla VVT-I, specifically by replacing the engine oil and oil filter. First, we …read all…
Posted on 4 January 2024 by ScegliAuto
Toyota Corolla (2013-2019 / MK 4, E170, E160)
How to replace Toyota Corolla oil and oil filter

To change the oil filter and the engine oil, we operate like this: we start by lifting the front part of the car, we open the bonnet keeping it raised, in the …read all…
Posted on 6 August 2022 by ScegliAuto
Toyota Corolla (2013-2019 / MK 4, E170, E160)
How to replace the engine oil and oil filter on Toyota Corolla MK4

In this video tutorial we will see the main steps to carry out the maintenance service of the oil change on Toyota Corolla fourth series, in simple and quick …read all…
Posted on 12 June 2022 by ScegliAuto
Toyota Corolla (2000-2007 / MK 2)
Changing the oil and oil filter on Toyota Corolla

It is advisable to warm up the engine for a few minutes before changing the oil. Lift the car and place a container under the engine oil drain bolt, then …read all…
Posted on 15 February 2024 by ScegliAuto
Toyota Corolla (1995-2002 / MK 1)
How to change engine oil on Corolla

How to change Toyota Corolla first series engine oil? We lift the car with a jack to access under the floor of the car. To change the engine oil we must …read all…
Posted on 4 January 2024 by ScegliAuto

Cigarette Lighter (6) Airbags (2) Alternator (1) Loudspeaker (1) Antenna (3) Car stereo (4) Battery (16) Coil (1) Gearbox (1) Spark plugs (1) Bodywork (1) Glove box (2) Control unit (1) Key (26) Locking the trunk (1) Timing belt (6) V-belt (3) Air conditioning (1) Air conditioning controls (1) -board computer (14) Checks and maintenance (89) Dashboard (4) Bearing (1) Brake discs (1) Headlight (9) Tail light (3) Air filter (8) Cabin air filter (10) Petrol filter (1) Diesel filter (4) Clutch (1) Injectors (2) Window lift switch (1) Xenon headlight kit (1) Light bulb (8) Side turn signal light bulb (2) Headlight bulb (9) Rear light bulb (8) Interior lights ceiling light bulb (6) Antifreeze liquid (1) License plate light (3) Handle (5) Engine (1) Starter motor (5) Brake oil (1) Engine oil (7) Door panel (6) Front bumper (7) Rear bumper (1) Brake pads (4) Tires (9) Gear Shift Knob (9) Pump (2) Fuel pump (15) Door (1) Window lift button (1) Instrument cluster (19) Wheel (1) Fuse box (63) Seat (15) Lock (3) Outside rearview mirror (8) Manufacturer's coat of arms (1) Windscreen wipers (4) Thermostat (1) EGR valve (1) Interior blower (3) Side window (2) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos