Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Corolla
    4. : Starter motor

Toyota Corolla - Starter motor

Toyota Corolla (2000-2007 / MK 2)
Where is the starter motor located in the Toyota Corolla?
In this video, we can see where the starter motor is located in the Toyota Corolla and how to proceed in case we need to replace it, a very simple operation. …read all…
Posted on 12 February 2024 by ScegliAuto
Toyota Corolla (2000-2007 / MK 2)
Toyota Corolla 4-4D MK2 starter motor replacement
Let's see how to replace the starter motor of the Toyota Corolla MK2: you can find it on auto-doc for 75.30 euros + 9.95 euros for delivery costs. We have to …read all…
Posted on 10 December 2022 by ScegliAuto
Toyota Corolla (2000-2007 / MK 2)
Removing the starter motor on Toyota Corolla
We see the disassembly of the starter motor on a Toyota Corolla. We lift the car with a jack or column bridge to disassemble the piece. Before disassembling …read all…
Posted on 6 February 2024 by ScegliAuto
Toyota Corolla (2006-2013 / MK 3)
Toyota Corolla starter replacement
Today we will see the main steps on how to disassemble and replace the starter motor of a Toyota Corolla from 2006 to 2013. First we open the engine hood of …read all…
Posted on 9 January 2024 by ScegliAuto
Toyota Corolla (2000-2007 / MK 2)
Removing the starter motor on Corolla
Disassembling the Corolla starter motor? We open the front hood and see the disassembly. We disconnect the terminals of the battery power supply. We …read all…
Posted on 18 December 2023 by ScegliAuto
Cigarette Lighter (6) Airbags (2) Alternator (1) Loudspeaker (1) Antenna (3) Car stereo (4) Battery (16) Coil (1) Gearbox (1) Spark plugs (1) Bodywork (1) Glove box (2) Control unit (1) Key (26) Locking the trunk (1) Timing belt (6) V-belt (3) Air conditioning (1) Air conditioning controls (1) -board computer (14) Checks and maintenance (89) Dashboard (4) Bearing (1) Brake discs (1) Headlight (9) Tail light (3) Air filter (8) Cabin air filter (10) Petrol filter (1) Diesel filter (4) Clutch (1) Injectors (2) Window lift switch (1) Xenon headlight kit (1) Light bulb (8) Side turn signal light bulb (2) Headlight bulb (9) Rear light bulb (8) Interior lights ceiling light bulb (6) Antifreeze liquid (1) License plate light (3) Handle (5) Engine (1) Starter motor (5) Brake oil (1) Engine oil (7) Door panel (6) Front bumper (7) Rear bumper (1) Brake pads (4) Tires (9) Gear Shift Knob (9) Pump (2) Fuel pump (15) Door (1) Window lift button (1) Instrument cluster (19) Wheel (1) Fuse box (63) Seat (15) Lock (3) Outside rearview mirror (8) Manufacturer's coat of arms (1) Windscreen wipers (4) Thermostat (1) EGR valve (1) Interior blower (3) Side window (2) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos