Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the starter motor in the Toyota Corolla?

Model: Toyota Corolla MK 2 - Years 2000-2007
Part: Starter motor

Video tutorial
Detailed instructions - In this tutorial, we can see how to disassemble the starter motor in the Toyota Corolla, an extremely simple and quick operation. First of all, make sure that the key is not inserted, in order to operate in complete safety, then open the hood and disconnect the negative terminal of the battery. Next, unscrew the indicated bolt using a 14mm socket wrench, disconnect the two power poles, and continue by unscrewing the second fixing bolt. At this point, we can go under the vehicle, grab the starter motor, and separate it from the support. To install the replacement, simply follow the reverse procedure.

Posted on 2 September 2024 by ScegliAuto


Related tutorials

Replacing the Starter Motor on a Toyota Corolla 4-4D MK2
Replacing the Starter Motor on a Toyota Corolla 4-4D MK2
Toyota Corolla (2000-2007 / MK 2) Let's see how to replace the starter motor on the Toyota Corolla MK2: you can find it on auto-doc for £75.30 plus £9.95 delivery. First, remove the e…
How to replace the starter motor of the Toyota Corolla
How to replace the starter motor of the Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) The following steps will show us how to disassemble and replace the starter motor of the Toyota Corolla with VVT-I gasoline engine, as well as the Co…
How to remove the rear bumper from a Toyota Corolla
How to remove the rear bumper from a Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Before you can begin, open the tailgate of the boot on your Toyota Corolla. Start by unscrewing and removing the screws that secure the rear bumper t…

Other guides you may be interested in

Where to Find the Fuses in the Nissan Qashqai

The fuse box in the Nissan Qashqai's cabin is located to the left of the steering wheel, where there is a small cover. Pull it off to access the fuse and relay box. To replace a fuse, if that is the cause of the issue, take a small pair of pliers and remove the fuse of the non-functioning component. Check that the bridge inside the fuse is not broken; if it is broken, replace the fuse with a new one of the same amperage as the old one. If the bridge is intact, the fuse is functioning correctly.

Watch the video!


by ScegliAuto

More videos