Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the starter motor of the Toyota Corolla

Model: Toyota Corolla MK 2 - Years 2000-2007
Part: Starter motor

Video tutorial
Detailed instructions - The following steps will show us how to disassemble and replace the starter motor of the Toyota Corolla with VVT-I gasoline engine, as well as the Corolla Verso. First, we open the hood of the car and start by disconnecting the coolant pipe from the thermostat valve of the radiator; then we also remove the radiator fan, as shown in the video. At this point, we will be able to access the starter motor, where we will unscrew the fixing screws and disconnect the electrical connector to remove it and replace it with the new one.

Posted on 22 December 2024 by ScegliAuto


Related tutorials

Replacement of the starter motor of the Toyota Corolla Verso
Replacement of the starter motor of the Toyota Corolla Verso
Toyota Corolla (2006-2013 / MK 3) The instructions in this guide will show us how to disassemble and replace the starter motor of the Toyota Corolla Verso. First, we open the hood and…
Removing the Starter Motor on a Toyota Corolla
Removing the Starter Motor on a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) This guide covers the removal of the starter motor on a Toyota Corolla. Lift the car with a jack or column lift to access the piece. Before removing …
Where is the Starter Motor Located in the Toyota Corolla?
Where is the Starter Motor Located in the Toyota Corolla?
Toyota Corolla (2000-2007 / MK 2) In this video, you can see where the starter motor is located in the Toyota Corolla and how to proceed if you need to replace it, which is a very sim…

Other guides you may be interested in

Where to Find the Fuses in the Nissan Qashqai

The fuse box in the Nissan Qashqai's cabin is located to the left of the steering wheel, where there is a small cover. Pull it off to access the fuse and relay box. To replace a fuse, if that is the cause of the issue, take a small pair of pliers and remove the fuse of the non-functioning component. Check that the bridge inside the fuse is not broken; if it is broken, replace the fuse with a new one of the same amperage as the old one. If the bridge is intact, the fuse is functioning correctly.

Watch the video!


by ScegliAuto

More videos