Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Thermostat in the Toyota Corolla?

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Thermostat

See other generations:
Video tutorial

In this tutorial, you will learn how to replace the thermostat in the Toyota Corolla, a simple operation that requires good manual skills. First, wait for the engine to cool down, then open the bonnet, connect a hose to the lower drain hole, open the valve, and let all the coolant in the system drain out. Next, disconnect the battery terminals starting with the negative, remove both the battery and its base, and proceed to disconnect the thermostat hose.

At this point, simply unscrew the two mounting nuts of the housing, remove the thermostat, insert the replacement, and reassemble everything by following the reverse procedure. Finally, remember to tighten the drain valve and refill with new coolant.


Posted on 3 June 2026 by ScegliAuto


Related tutorials

Toyota Corolla (2019-2026 / MK 5, E210) Before you can begin, open the tailgate of the boot on your Toyota Corolla. Start by unscrewing and removing the screws that secure the rear bumper t…
Toyota Corolla (2006-2013 / MK 3) Before you begin, open the rear doors of your Toyota Corolla. Start by pulling upwards on the hooks located at the upper corners of the rear seats to…
Toyota Corolla (2006-2013 / MK 3) Before you can start, open the rear doors of your Toyota Corolla. Begin by inserting a thin, long, and sturdy tool under the rear seat bench. Then, l…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Hyundai Kona?

To completely turn off the tyre pressure warning light on the Hyundai Kona, inflate the tyres until they reach the recommended pressure value, which is indicated on the sticker affixed to the driver’s door pillar. At this point, turn on the instrument cluster by inserting the ignition key into the ignition switch. Then, navigate through the menu using the arrow buttons on the right spoke of the steering wheel. When the tyre option appears, press and hold the confirmation button to turn off the warning light.

Watch the video!


by ScegliAuto

More videos