|
Do it yourself
| |||
| ||||
How to remove the EGR valve from the Toyota Yaris?
Model: Toyota Yaris
Xp130
- Years:
2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
To replace the EGR valve on the Toyota Yaris, open the bonnet to access the engine compartment. Once the bonnet is open, you will need to remove the cover from the top of the engine to access the valve. This is located between the intake manifold and the exhaust manifold. To remove it, loosen the corresponding screws and detach it from the components it is connected to. Once the old valve has been removed, you can replace it with a new spare part and install it back in its housing, also reinserting the engine cover.
Updated on 20 May 2026 by ScegliAuto
Related tutorials
Toyota Yaris
(2005-2011 /
Xp90)
Before you start, open the front bonnet of your Toyota Yaris. Begin by disconnecting the connector attached to the EGR valve. Next, unscrew and remov…
Toyota Yaris
(2005-2011 /
Xp90)
To replace the EGR valve in a Toyota Yaris, open the bonnet and allow the engine to cool completely. Locate the EGR valve, positioned on the side of …
Toyota Yaris
(2011-2019 /
Xp130)
In this video, you can see where the EGR valve is located in the Toyota Yaris, useful if you need to replace or clean it. As shown, the valve is posi…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Remove the Spare Wheel on a Citroen C4 Grand Picasso
Today, in this short and simple guide, follow the steps to remove the spare wheel from the floor and replace it with the flat one on a Citroen C4 Grand Picasso. First, open the boot's tailgate and start by removing the upper shelf; then use the supplied key to unscrew the spare wheel bolt to remove it, as shown in the video. At this point, lift the vehicle with the jack and unscrew the wheel bolts, replacing it with the spare; then secure it with the bolts, tightening them in a cross pattern! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.027
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |