Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the EGR Valve from a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: EGR valve

See other generations:
Video tutorial

Before you start, open the front bonnet of your Toyota Yaris. Begin by disconnecting the connector attached to the EGR valve.

Next, unscrew and remove the bolts securing the hoses, and then disconnect the hoses from the valve. At this point, unscrew and remove the bolts securing the valve.

This will free the EGR valve, which you can then extract from its housing. Once you complete this step, you can finally remove the valve, successfully finishing the disassembly.


Updated on 5 May 2026 by ScegliAuto


Related tutorials

Where is the EGR Valve in the Toyota Yaris?
Where is the EGR Valve in the Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) In this video, you can see where the EGR valve is located in the Toyota Yaris, useful if you need to replace or clean it. As shown, the valve is posi…
How to remove the EGR valve from the Toyota Yaris?
How to remove the EGR valve from the Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) To replace the EGR valve on the Toyota Yaris, open the bonnet to access the engine compartment. Once the bonnet is open, you will need to remove the …
How to Replace the EGR Valve in a Toyota Yaris
How to Replace the EGR Valve in a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) To replace the EGR valve in a Toyota Yaris, open the bonnet and allow the engine to cool completely. Locate the EGR valve, positioned on the side of …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos