Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the EGR Valve in a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: EGR valve

See other generations:
Video tutorial

To replace the EGR valve in a Toyota Yaris, open the bonnet and allow the engine to cool completely. Locate the EGR valve, positioned on the side of the engine and connected to the intake manifold and the exhaust gas circuit.

Disconnect the electrical connector and, if present, the hoses connected to the valve. Then unscrew the fixing bolts and remove the valve, taking care with the gasket.

Clean the mating surfaces thoroughly, removing any dirt or residue, then install the new EGR valve with a new gasket. Tighten the bolts to the specified torque, reconnect the electrical connector and any hoses removed earlier.

Finally, start the engine and check for exhaust gas leaks or warning lights on the dashboard, ensuring that the engine operates smoothly.


Posted on 30 June 2026 by ScegliAuto


Related tutorials

How to Remove the EGR Valve from a Toyota Yaris
How to Remove the EGR Valve from a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Before you start, open the front bonnet of your Toyota Yaris. Begin by disconnecting the connector attached to the EGR valve. Next, unscrew and remov…
Where is the EGR Valve in the Toyota Yaris?
Where is the EGR Valve in the Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) In this video, you can see where the EGR valve is located in the Toyota Yaris, useful if you need to replace or clean it. As shown, the valve is posi…
How to remove the EGR valve from the Toyota Yaris?
How to remove the EGR valve from the Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) To replace the EGR valve on the Toyota Yaris, open the bonnet to access the engine compartment. Once the bonnet is open, you will need to remove the …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos