Do it yourself
Frequently asked questions about cars and motorcycles

How to clean the throttle valve of the Toyota Aygo

Model: Toyota Aygo MK 1, Ab10 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Valve

See other generations:
Video tutorial

Let's see how to clean the throttle valve of the Toyota Aygo: first of all, once the front hood is open, we need to remove the air box, unlocking the 4 clips that secure the cover. This way the throttle valve is visible with its flaps.

We unscrew the three fixing bolts and move connectors and cables to facilitate access; we disconnect the two electrical connectors by pressing the tabs; if the accelerator is mechanical, we also remove it; we spray a detergent spray like LiquiMoly that we can find on Amazon with the code B00295DCTK at the price of 9.72 euros with free delivery in one day for Prime customers; remove carbon deposits especially on the sides of the throttle, and allow to air dry carefully.

Reinsert the clean valve, screw in the bolts, reconnect the electrical connector, reposition the air box and start the engine to check its operation and sound.


Posted on 9 November 2025 by ScegliAuto


Related tutorials

Toyota Aygo (2014-2023 / MK 2, Ab40) On the Toyota Aygo 1.0, the mass air flow (MAF) sensor does not exist as a separate component. The system uses a combined MAP (manifold absolute pres…
Toyota Aygo (2005-2014 / MK 1, Ab10) This is a medium-level tutorial. Open the bonnet and insert the support rod. Remove the retaining clips of the air filter breather hose and the intak…
…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Remove the Spare Wheel on a Citroen C4 Grand Picasso

Today, in this short and simple guide, follow the steps to remove the spare wheel from the floor and replace it with the flat one on a Citroen C4 Grand Picasso. First, open the boot's tailgate and start by removing the upper shelf; then use the supplied key to unscrew the spare wheel bolt to remove it, as shown in the video. At this point, lift the vehicle with the jack and unscrew the wheel bolts, replacing it with the spare; then secure it with the bolts, tightening them in a cross pattern!

Watch the video!


by ScegliAuto

More videos