Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the EGR Valve Located on the Toyota Yaris?

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: EGR valve

See other generations:
Video tutorial

In this video, you can see where the EGR valve is located on the Toyota Yaris and how to proceed if you need to remove it, for example, to clean or replace it. As shown, the valve is located at the front of the engine, right next to the exhaust manifold.

Before removing it, ensure the engine is completely cold, then open the bonnet and remove the plastic cover.

Next, unscrew all the bolts and nuts indicated with a 12mm socket, disconnect both the sensor connector and the coolant pipe, and proceed to remove the valve. To reassemble everything, simply follow the reverse procedure.


Updated on 16 October 2026 by ScegliAuto


Related tutorials

Where is the EGR Valve in the Toyota Yaris?
Where is the EGR Valve in the Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) In this video, you can see where the EGR valve is located in the Toyota Yaris, useful if you need to replace or clean it. As shown, the valve is posi…
How to disassemble the EGR valve in the Toyota Yaris Hybrid?
How to disassemble the EGR valve in the Toyota Yaris Hybrid?
Toyota Yaris (2011-2019 / Xp130) In this tutorial we can see how to disassemble the EGR valve in the Toyota Yaris, a very simple and quick operation. First of all, we wait for the en…
How to remove the EGR valve from the Toyota Yaris?
How to remove the EGR valve from the Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) To replace the EGR valve on the Toyota Yaris, open the bonnet to access the engine compartment. Once the bonnet is open, you will need to remove the …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos