Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the EGR valve in the Toyota Yaris Hybrid?

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: EGR valve

See other generations:
Video tutorial

In this tutorial we can see how to disassemble the EGR valve in the Toyota Yaris, a very simple and quick operation. First of all, we wait for the engine to be completely cold, then we open the hood and remove the plastic cover.

We then release the clip holding the indicated tube, disconnect the tube itself being careful not to let the coolant out and close it. We then remove the steel manifold by unscrewing the respective bolts with a 10mm key and another with a 12mm key, remove the valve and disconnect the sensor connector.

To reassemble everything, just follow the reverse procedure.


Posted on 11 June 2025 by ScegliAuto


Related tutorials

How to Remove the EGR Valve from a Toyota Yaris
How to Remove the EGR Valve from a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Before you start, open the front bonnet of your Toyota Yaris. Begin by disconnecting the connector attached to the EGR valve. Next, unscrew and remov…
Where is the EGR Valve in the Toyota Yaris?
Where is the EGR Valve in the Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) In this video, you can see where the EGR valve is located in the Toyota Yaris, useful if you need to replace or clean it. As shown, the valve is posi…
How to Replace the EGR Valve in a Toyota Yaris
How to Replace the EGR Valve in a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) To replace the EGR valve in a Toyota Yaris, open the bonnet and allow the engine to cool completely. Locate the EGR valve, positioned on the side of …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos