Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Engine from a Toyota Corolla MK4

Model: Toyota Corolla E160, E170, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine

See other generations:
Video tutorial

This guide will cover the main steps to remove the engine from the fourth series Toyota Corolla. First, lift the vehicle and drain the engine oil; then disconnect the exhaust manifold by unscrewing the transmission bolts to separate it from the engine block.

Next, disconnect the various electrical connectors and remove the fuel lines connected to the tank and pump; then remove the belt and alternator, and finally unscrew the engine mount bolts, following the video until the end!


Updated on 3 May 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel and Airbag from a Toyota Corolla
How to Remove the Steering Wheel and Airbag from a Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) These brief and simple steps will show you how to remove and replace the steering wheel and its airbag from a Toyota Corolla. First, get into the veh…
Replacing the Fuel Pump on a Toyota Corolla
Replacing the Fuel Pump on a Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) Follow these instructions to remove and replace the fuel pump on a Toyota Corolla. First, open the rear doors and begin by removing the rear seat. Ne…
Removing the Dashboard Components of the Toyota Corolla
Removing the Dashboard Components of the Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) Today, you will see the instructions that will allow you to remove the components of the dashboard of the Toyota Corolla. First, get inside the vehic…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos