Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil in a Toyota Corolla

Model: Toyota Corolla MK 3 - Years 2006-2013
Part: Engine oil

To change the oil in your Toyota Corolla, the steps are very simple. First, raise the car on ramps to access the underside. Next, locate the oil sump and the adjacent filter. Using a container, drain the old oil from both the sump and the filter. Once this is done, proceed to replace the filter and, if damaged, its gasket. Finally, clean the threaded area on the sump and replace the plug if necessary. After this, your car is ready, and you can pour in new oil.

Posted on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change Engine Oil on Corolla
How to Change Engine Oil on Corolla
Toyota Corolla (1995-2002 / MK 1) How to replace the engine oil on the first series Toyota Corolla? Lift the car with a jack to access underneath the vehicle. To change the engine oil…
Resetting the oil change service indicator light for the Toyota Corolla.
Resetting the oil change service indicator light for the Toyota Corolla.
Toyota Corolla (2013-2019 / MK 4, E170, E160) Let's see the necessary instructions in order to reset the maintenance service light of the oil change for the Toyota Corolla. First of all, get in t…
How to Reset the Oil Light on a Toyota Corolla
How to Reset the Oil Light on a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) If you have just changed the engine oil in your Toyota Corolla but do not know how to reset the warning light, simply follow the instructions in this…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos