Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Alternator on the Toyota Corolla VVT-I MK2

Model: Toyota Corolla MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Alternator

See other generations:
Video tutorial

In this video tutorial, see how to remove and replace the alternator on the Toyota Corolla VVT-I MK2 by following these simple and quick steps. First, open the bonnet and start by removing the alternator belt, loosening the tensioner; then disconnect the electrical wiring of the alternator and undo all the mounting bolts to remove it, as shown in the video.

At this point, replace it with the new one, using the original part; position it in place and use a socket spanner to secure it with its bolts!


Updated on 6 May 2026 by ScegliAuto


Related tutorials

Replacing the Serpentine Belt on the Toyota Corolla 1.8 VVT-I
Replacing the Serpentine Belt on the Toyota Corolla 1.8 VVT-I
Toyota Corolla (2006-2013 / MK 3) In today's video, you will see how to remove and replace the serpentine belt on the Toyota Corolla 1.8 VVT-I by following these simple steps. First, …
Removing the Clutch Cylinder on Toyota Corolla VVT-I
Removing the Clutch Cylinder on Toyota Corolla VVT-I
Toyota Corolla (2000-2007 / MK 2) Here are the instructions to remove the clutch pump or cylinder on a Toyota Corolla with a VVT-I engine, in this case with the gearbox removed from t…
Removing the Injectors from the Toyota Corolla VVT-I
Removing the Injectors from the Toyota Corolla VVT-I
Toyota Corolla (2000-2007 / MK 2) Today, discover the steps to remove and replace the injectors of the Toyota Corolla VVT-I by following the instructions below. First, open the bonnet…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos