Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Injectors from the Toyota Corolla VVT-I

Model: Toyota Corolla MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Fuel injectors

See other generations:
Video tutorial

Today, discover the steps to remove and replace the injectors of the Toyota Corolla VVT-I by following the instructions below. First, open the bonnet of the vehicle and start by removing the plastic protective cover.

Next, remove the injector rail, disconnecting each injector one by one, as shown in the video. At this point, carry out a revision or directly replace the injectors, installing them correctly onto the rail; reassemble everything and start the engine, checking for proper operation.


Updated on 27 October 2026 by ScegliAuto


Related tutorials

Removing Injectors from Toyota Corolla 1.6 VVT-i
Removing Injectors from Toyota Corolla 1.6 VVT-i
Toyota Corolla (2006-2013 / MK 3) Today, you will see the main steps to remove and replace the injectors on a Toyota Corolla. First, disconnect the two battery terminals and unplug th…
Removing the Clutch Cylinder on Toyota Corolla VVT-I
Removing the Clutch Cylinder on Toyota Corolla VVT-I
Toyota Corolla (2000-2007 / MK 2) Here are the instructions to remove the clutch pump or cylinder on a Toyota Corolla with a VVT-I engine, in this case with the gearbox removed from t…
Replacing the Serpentine Belt on the Toyota Corolla 1.8 VVT-I
Replacing the Serpentine Belt on the Toyota Corolla 1.8 VVT-I
Toyota Corolla (2006-2013 / MK 3) In today's video, you will see how to remove and replace the serpentine belt on the Toyota Corolla 1.8 VVT-I by following these simple steps. First, …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos