Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Injectors from Toyota Corolla 1.6 VVT-i

Model: Toyota Corolla MK 3 - Years 2006-2013
Part: Fuel injectors

Today, you will see the main steps to remove and replace the injectors on a Toyota Corolla. First, disconnect the two battery terminals and unplug the electrical connectors located at the injectors; move away the various wiring and using a socket spanner, unscrew the fixing screws of the pipes leading to the injectors. At this point, remove the bar and then extract the injectors (there are four in total); simply replace them with new ones, using original parts, and reassemble everything by applying the reverse procedure.

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the injectors of the Toyota Corolla VVT-I
Disassembly of the injectors of the Toyota Corolla VVT-I
Toyota Corolla (2000-2007 / MK 2) Today we will discover the steps on how to disassemble and replace the injectors of the Toyota Corolla VVT-I, following the instructions below. First…
Removing the Clutch Cylinder on Toyota Corolla VVT-I
Removing the Clutch Cylinder on Toyota Corolla VVT-I
Toyota Corolla (2000-2007 / MK 2) Here are the instructions to remove the clutch pump or cylinder on a Toyota Corolla with a VVT-I engine, in this case with the gearbox removed from t…
Replacing the Serpentine Belt on the Toyota Corolla 1.8 VVT-I
Replacing the Serpentine Belt on the Toyota Corolla 1.8 VVT-I
Toyota Corolla (2006-2013 / MK 3) In today's video, you will see how to remove and replace the serpentine belt on the Toyota Corolla 1.8 VVT-I by following these simple steps. First, …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos