Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Corolla
    4. : Replacement of the fuel pump of the Toyota Corolla.

Toyota Corolla - Video tutorial

Model: Toyota Corolla MK 4, E170, E160 - Years 2013-2019
Part: Fuel pump
Operation: Replacement of the fuel pump of the Toyota Corolla.

Let's see how to disassemble and replace the fuel pump of the Toyota Corolla, following the instructions below. First, we open the rear doors and start disassembling and removing the rear seat; then we remove the plastic cover to access the fuel pump, as shown in the video. Now we disconnect the fuel lines and the electrical connector of the float, then unscrew the pump ring to remove it from the tank; we then install the new fuel pump, following the reverse procedure!


Posted on 19 November 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos