Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear seat of the 2007 Toyota Corolla

Model: Toyota Corolla MK 2 - Years 2000-2007
Part: Seat

In the following article, we will see how to remove the rear seats of the 2007 Toyota Corolla. For this operation, no tools are needed, and it could be useful for replacing them or in case of problems. To remove the seats, you will need to lever from the bottom and side on both sides. This way, the fixing pins will be removed, once the pins are removed, the seat can be removed, after which you will need to disconnect the connectors underneath them. As we have seen, the operation requires little time to be carried out.

Posted on 3 August 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Rear Seat Bench of a Toyota Corolla
How to Remove the Rear Seat Bench of a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Before you can start, open the rear doors of your Toyota Corolla. Begin by inserting a thin, long, and sturdy tool under the rear seat bench. Then, l…
How to remove the rear seat of a Toyota Corolla
How to remove the rear seat of a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) In this video, we can see how easy it is to remove the rear seat of a Toyota Corolla. In fact, to remove the seat base, you just need to lift the low…
How to remove the rear seats from the Toyota Corolla?
How to remove the rear seats from the Toyota Corolla?
Toyota Corolla (2000-2007 / MK 2) To remove the rear seats from the Toyota Corolla, simply remove the fastening clips located under the seat: start by lifting the front part of the se…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos