Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front seat of the Toyota Corolla

Model: Toyota Corolla MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Seat

See other generations:
Video tutorial

These short and simple instructions will show us how to disassemble and remove the front seat on the driver's side or passenger side of the Toyota Corolla. First, we open the front door on the driver's side and start unscrewing all the fixing screws we find on the seat rails, moving the seat back and forth; then we lift the seat and disconnect the electrical connector found underneath, removing the seat from the cabin, as shown in the video.

At this point, we carry out the repair or replacement of the front seat, applying the reverse procedure for reassembly!


Posted on 22 July 2025 by ScegliAuto


Related tutorials

How to Remove the Front Seat of the Toyota Corolla
How to Remove the Front Seat of the Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Briefly see the instructions that will allow you to remove and replace the front seat of the Toyota Corolla by following these simple steps. First, o…
How to Remove the Front Seat on Toyota Corolla
How to Remove the Front Seat on Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Need to remove the front seat from the Toyota Corolla? Start by removing the seat and replacing it with a new one. Slide the seat back and raise the …
How to Remove the Front Seat from My Toyota Corolla?
How to Remove the Front Seat from My Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) This short video shows how to remove the front seats from a Toyota Corolla in a few simple steps. First, open the bonnet and disconnect the battery. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos