Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear seats of the Toyota Corolla.

Model: Toyota Corolla MK 5, E210 - Years 2019-2026
Part: Seat

In this guide, we will see the instructions that will allow us to disassemble and replace the rear seats of the Toyota Corolla. First, let's open the rear doors of the vehicle and start pulling the rear bench seat upwards with force to detach and remove it; we remove the seatbelt attachments and then unscrew the fastening screws of the backrests if we also want to remove them, as shown in the video. At this point, we perform the cleaning or repair of the rear seats, finally reassembling the backrests in order and then the bench seat.

Posted on 25 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seats from a Toyota Corolla
How to Remove the Rear Seats from a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) We will briefly go through the steps to remove the rear seats from the Toyota Corolla, following the instructions below. First, open the rear doors a…
How to remove the rear seats from the Toyota Corolla?
How to remove the rear seats from the Toyota Corolla?
Toyota Corolla (2000-2007 / MK 2) To remove the rear seats from the Toyota Corolla, simply remove the fastening clips located under the seat: start by lifting the front part of the se…
How to Remove the Rear Seat Bench of a Toyota Corolla
How to Remove the Rear Seat Bench of a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Before you can start, open the rear doors of your Toyota Corolla. Begin by inserting a thin, long, and sturdy tool under the rear seat bench. Then, l…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos