Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear seat of the Toyota Corolla.

Model: Toyota Corolla MK 5, E210 - Years 2019-2026
Part: Rear bench seat

Below we will discover the instructions on how to disassemble and remove the rear seat of the Toyota Corolla, in simple steps. First, we open the rear doors of the car and start pulling the rear seat upwards with force to detach and remove it; then we disconnect the safety belt attachments, unscrewing the screws found at the base, as shown in the video. If we also want to remove the backrests, we just need to unscrew the screws located at the bottom, behind the backrests; finally, we reassemble the rear seat, applying the reverse process.

Posted on 26 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear seat of the Toyota Corolla
How to disassemble the rear seat of the Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) If you want to disassemble the rear seat of your Toyota Corolla by yourself but don't know how to do it, don't worry because below we will describe t…
How to Remove the Rear Seat Bench of a Toyota Corolla
How to Remove the Rear Seat Bench of a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Before you can start, open the rear doors of your Toyota Corolla. Begin by inserting a thin, long, and sturdy tool under the rear seat bench. Then, l…
How to remove the rear seats of the Toyota Corolla.
How to remove the rear seats of the Toyota Corolla.
Toyota Corolla (2019-2026 / MK 5, E210) In this guide, we will see the instructions that will allow us to disassemble and replace the rear seats of the Toyota Corolla. First, let's open the…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos