Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Seat Bench of a Toyota Corolla

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Seat

See other generations:
Video tutorial

Before you can start, open the rear doors of your Toyota Corolla. Begin by inserting a thin, long, and sturdy tool under the rear seat bench.

Then, leverage the tool. This will release the clips that secure the rear seat bench in its housing.

At this point, extract and remove the rear seat bench from the cabin. Once you have completed this step, you will have successfully disassembled the rear seat bench of your Toyota Corolla.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

Toyota Corolla (2019-2026 / MK 5, E210) In this guide, we will see the instructions that will allow us to disassemble and replace the rear seats of the Toyota Corolla. First, let's open the…
Toyota Corolla (2006-2013 / MK 3) Need to remove the front seat from the Toyota Corolla? Start by removing the seat and replacing it with a new one. Slide the seat back and raise the …
Toyota Corolla (2006-2013 / MK 3) Before you begin, open the rear doors of your Toyota Corolla. Start by pulling upwards on the hooks located at the upper corners of the rear seats to…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos