Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seat of the Toyota Corolla

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Seat

See other generations:
Video tutorial

Briefly see the instructions that will allow you to remove and replace the front seat of the Toyota Corolla by following these simple steps. First, open the front door and start undoing all the fixing screws found on the seat rails using a ratchet with an extension.

Move the seat back and forth to access it, as shown in the video. At this point, disconnect the electrical connector found underneath; then remove the entire seat from the cabin, applying the reverse procedure for reassembly!


Updated on 2 September 2026 by ScegliAuto


Related tutorials

How to Remove the Front Seat on Toyota Corolla
How to Remove the Front Seat on Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Need to remove the front seat from the Toyota Corolla? Start by removing the seat and replacing it with a new one. Slide the seat back and raise the …
How to remove the front seat of the Toyota Corolla
How to remove the front seat of the Toyota Corolla
Toyota Corolla (1995-2002 / MK 1) These short and simple instructions will show us how to disassemble and remove the front seat on the driver's side or passenger side of the Toyota Co…
How to Remove the Rear Seat Bench of a Toyota Corolla
How to Remove the Rear Seat Bench of a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Before you can start, open the rear doors of your Toyota Corolla. Begin by inserting a thin, long, and sturdy tool under the rear seat bench. Then, l…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos