Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Fuel Pump on a Toyota Corolla

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fuel pump

See other generations:
Video tutorial

To replace the fuel pump on a Toyota Corolla, unclip the pins located under the rear seat so that it can be lifted to access the components underneath. After removing the protective cover of the pump, it will be accessible and can be removed from its housing.

To do this, unscrew its mounting screws and disconnect all connectors; once the old pump is removed, insert the new one, connecting and securing it properly, and reassemble all previously removed components.


Updated on 27 May 2026 by ScegliAuto


Related tutorials

Toyota Corolla (2000-2007 / MK 2) Below are the step-by-step instructions to remove and replace the fuel pump in the Toyota Corolla. First, open the rear doors and start by removing t…
Toyota Corolla (2000-2007 / MK 2) To replace the fuel pump on the Toyota Corolla, remove the clips located under the rear seat so that it can be completely removed. Underneath, you wi…
Toyota Corolla (2013-2019 / E160, E170, MK 4) Follow these instructions to remove and replace the fuel pump on a Toyota Corolla. First, open the rear doors and begin by removing the rear seat. Ne…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos