Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Fuel Pump in the Toyota Corolla

Model: Toyota Corolla MK 2 - Years 2000-2007
Part: Fuel pump

Below are the step-by-step instructions to remove and replace the fuel pump in the Toyota Corolla. First, open the rear doors and start by removing the rear seat by pulling it upwards; then unscrew the four fastening screws found on the sides of the fuel pump cover, as shown in the video. Next, disconnect the electrical connector of the fuel pump and the fuel line; finally, unscrew the pump retaining ring to remove it from the tank, replacing it with the original to ensure compatibility!

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fuel pump of the Toyota Corolla.
How to replace the fuel pump of the Toyota Corolla.
Toyota Corolla (2000-2007 / MK 2) Let's discover the useful instructions on how to disassemble and replace the fuel pump of the Toyota Corolla in simple steps. First, we open the rear…
Replacing the Fuel Pump on a Toyota Corolla
Replacing the Fuel Pump on a Toyota Corolla
Toyota Corolla (2013-2019 / MK 4, E170, E160) Follow these instructions to remove and replace the fuel pump on a Toyota Corolla. First, open the rear doors and begin by removing the rear seat. Ne…
How to replace the fuel pump on the Toyota Corolla?
How to replace the fuel pump on the Toyota Corolla?
Toyota Corolla (2000-2007 / MK 2) To replace the fuel pump on the Toyota Corolla, remove the clips located under the rear seat so that it can be completely removed. Underneath, you wi…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos