Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel pump of the Toyota Corolla.

Model: Toyota Corolla MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Fuel pump

See other generations:
Video tutorial

Let's discover the useful instructions on how to disassemble and replace the fuel pump of the Toyota Corolla in simple steps. First, we open the rear doors of the vehicle and start removing the rear seat by lifting it up; then we remove the fuel pump cover and disconnect the electrical connector of the float and the fuel lines, as shown in the video.

At this point, we unscrew the pump ring, remove the pump from the tank, and replace it with the new original one; then we reassemble and properly connect the fuel pump!


Posted on 29 November 2025 by ScegliAuto


Related tutorials

Replacing the Fuel Pump on a Toyota Corolla
Replacing the Fuel Pump on a Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) Follow these instructions to remove and replace the fuel pump on a Toyota Corolla. First, open the rear doors and begin by removing the rear seat. Ne…
How to Remove and Replace the Fuel Pump in the Toyota Corolla
How to Remove and Replace the Fuel Pump in the Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) Below are the step-by-step instructions to remove and replace the fuel pump in the Toyota Corolla. First, open the rear doors and start by removing t…
How to replace the fuel pump on the Toyota Corolla?
How to replace the fuel pump on the Toyota Corolla?
Toyota Corolla (2000-2007 / MK 2) To replace the fuel pump on the Toyota Corolla, remove the clips located under the rear seat so that it can be completely removed. Underneath, you wi…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos