Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear seat of a Toyota Corolla

Model: Toyota Corolla MK 3 - Years 2006-2013
Part: Rear bench seat

In this video, we can see how easy it is to remove the rear seat of a Toyota Corolla. In fact, to remove the seat base, you just need to lift the lower part with some force and lift it, and we will see both sides rise. In this way, the holding hooks have been removed from their lock without the need for any other interventions and the seat has been lifted. At this point, it will be enough to exit it horizontally from one of the rear doors and the seat will have been removed. This technique is also valid in the case of two separate seats divided according to the 60%-40% percentage.

Posted on 6 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seat Bench of a Toyota Corolla
How to Remove the Rear Seat Bench of a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Before you can start, open the rear doors of your Toyota Corolla. Begin by inserting a thin, long, and sturdy tool under the rear seat bench. Then, l…
How to remove the rear seats from the Toyota Corolla?
How to remove the rear seats from the Toyota Corolla?
Toyota Corolla (2000-2007 / MK 2) To remove the rear seats from the Toyota Corolla, simply remove the fastening clips located under the seat: start by lifting the front part of the se…
How to disassemble the rear seat of the Toyota Corolla.
How to disassemble the rear seat of the Toyota Corolla.
Toyota Corolla (2019-2026 / MK 5, E210) Below we will discover the instructions on how to disassemble and remove the rear seat of the Toyota Corolla, in simple steps. First, we open the rea…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos