Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel and Airbag from a Toyota Corolla

Model: Toyota Corolla MK 4, E170, E160 - Years 2013-2019
Part: Steering wheel

These brief and simple steps will show you how to remove and replace the steering wheel and its airbag from a Toyota Corolla. First, get into the vehicle and start by removing the airbag from the steering wheel by pushing on the holes found at the back with something sharp; then disconnect the electrical connector, as shown in the video. At this point, also remove the steering wheel by loosening the central bolt with a ratchet spanner; then refit the steering wheel in a perfectly straight position, finally refitting the airbag and reconnecting it!

Updated on 29 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the steering wheel airbag from the Toyota Corolla?
How to remove the steering wheel airbag from the Toyota Corolla?
Toyota Corolla (2019-2026 / MK 5, E210) To remove the steering wheel airbag from the Toyota Corolla, turn the steering wheel left and right to access the bolts at the back of the steering w…
How to disconnect the passenger side airbag of the Toyota Corolla
How to disconnect the passenger side airbag of the Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Disconnecting the passenger seat airbag on a Toyota Corolla vehicle is an operation that can be performed independently. The first thing to do, even …
How to Disable the Passenger Airbag on the Toyota Corolla
How to Disable the Passenger Airbag on the Toyota Corolla
Toyota Corolla (2013-2019 / MK 4, E170, E160) In today's video, you will see how to disable the passenger airbag on the Toyota Corolla in simple and quick steps. First, open the front passenger d…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos