Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Spare Wheel and Tools to Change It on the Toyota Corolla

Model: Toyota Corolla E160, E170, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Wheel

See other generations:
Video tutorial

The spare wheel and the kit to replace it in the Toyota Corolla are located in the boot. To retrieve it, open the boot of the car and lift the floor panel.

Remove it from its housing as shown in the video. Above the wheel, you will find the kit to unscrew the wheel bolts and the jack handle, which are secured in a polystyrene housing.

Remove it from its place. At this point, unscrew the centre cap located in the middle of the wheel and remove the wheel from the compartment.

Now, look to the right of the boot and lift the plastic box as seen in the video. There you will find the jack.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

Where is the Starter Motor Located in the Toyota Corolla?
Where is the Starter Motor Located in the Toyota Corolla?
Toyota Corolla (2000-2007 / MK 2) In this video, you can see where the starter motor is located in the Toyota Corolla and how to proceed if you need to replace it, which is a very sim…
Where is the oil pressure sensor located in the Toyota Corolla?
Where is the oil pressure sensor located in the Toyota Corolla?
Toyota Corolla (2000-2007 / MK 2) In this video, you can see where the oil pressure sensor is located in the Toyota Corolla and how to proceed if you need to replace it, a very simple…
Where is the Battery Located in the Toyota Corolla?
Where is the Battery Located in the Toyota Corolla?
Toyota Corolla (2019-2026 / MK 5, E210) In this video, see where the battery is located in the Toyota Corolla and how to proceed if you need to replace it, a very simple and quick operation…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos