Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Corolla
    4. : Where is the oil pressure sensor located in the Toyota Corolla?

Toyota Corolla - Video tutorial

Model: Toyota Corolla MK 2 - Years 2000-2007
Part: Checks and maintenance
Operation: Where is the oil pressure sensor located in the Toyota Corolla?

In this video we can see where the oil pressure sensor is located in the Toyota Corolla and how to proceed in case we need to replace it, a very simple and quick operation. As shown, the sensor in question is located in the lower front area of the engine, right at the base of the oil filter. To replace it, make sure first of all that the engine is cool enough, so as to operate safely, then disconnect the power connector and unscrew it using a wrench. To install the replacement, simply follow the reverse procedure.


Posted on 29 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Corolla 2006-2013 - What does the P/S light on the Toyota Corolla indicate? Read Answer
    • Corolla 2000-2007 - What does the warning light with a steering wheel indicate in the Toyota Corolla RunX? Read Answer
    • Corolla 2019-2026 - What does the ABS warning light on the Toyota Corolla mean? Read Answer
    • Corolla 2013-2019 - What does the P/S light on the Toyota Corolla indicate? Read Answer
    • Corolla 2013-2019 - What does the "TRC Off" indicator light mean in the Toyota Corolla? Read Answer
    • Corolla 2013-2019 - Why is the Toyota Corolla heater not working? Read Answer
    • Corolla 2000-2007 - What problems does the Toyota Corolla 1.4 D4D have? Read Answer
    • Corolla 2019-2026 - What does the "TRC" light in Toyota Corolla mean? Read Answer
    • Corolla 2006-2013 - What are the problems with the Toyota Corolla 1.4 d4d? Read Answer
    • Corolla 2019-2026 - What are the warning lights on the Toyota Corolla Hybrid? Read Answer
    • Corolla 2000-2007 - How to set the time in the 2007 Toyota Verso? Read Answer
    • Corolla 2019-2026 - How do I reset the Toyota Corolla service indicator? Read Answer
    • Corolla 2013-2019 - What warning lights are present in the dashboard of the Toyota Corolla e170? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos