Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Tyre Pressure Warning Light on a Toyota Corolla?

Model: Toyota Corolla MK 5, E210 - Years 2019-2026
Part:

To completely clear the tyre pressure warning light on a Toyota Corolla, you will first need to inflate the tyres until they reach the recommended pressure value: this value will be found on the sticker affixed to the driver’s door pillar. Once inflated, navigate to the menu to select 'Vehicle Settings'; then select 'TPWS' and finally 'Set pressure'. By following this procedure, you will notice that the pressure light will disappear from the instrument panel, allowing it to be turned off, completing the operation.

Posted on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Corolla (2006-2013 / MK 3) Before you begin, sit in the driver's seat of your Toyota Corolla. Insert the key into the ignition and turn it to the first position to activate the…
Toyota Corolla (2019-2026 / MK 5, E210) Below are the steps necessary to reset the tyre pressure warning light on the Toyota Corolla Hybrid; before performing the reset, ensure all four tyr…
Toyota Corolla (2006-2013 / MK 3) To reset the tyre pressure warning light on the Toyota Corolla, first inflate the car's tyres to the recommended pressure value: this value is indica…

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos