Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Toyota Corolla

Model: Toyota Corolla MK 5, E210 - Years 2019-2026
Part: Tire pressure warning light

On the Toyota Corolla, you can reset the tyre pressure warning light by first inflating all the tyres: they must be brought back to the correct pressure value, which is indicated on the sticker attached to the driver's door pillar. Once all the tyres have been inflated, turn on the ignition by rotating the key in the ignition switch: after the dashboard is on, scroll through the menu using the controls on the left spoke of the steering wheel, selecting the low pressure icon and confirming the reset.

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Toyota Corolla
How to Reset the Tyre Pressure Warning Light on a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Before you begin, sit in the driver's seat of your Toyota Corolla. Insert the key into the ignition and turn it to the first position to activate the…
How to reset the tyre pressure warning light on the Toyota Corolla?
How to reset the tyre pressure warning light on the Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) To reset the tyre pressure warning light on the Toyota Corolla, first inflate the car's tyres to the recommended pressure value: this value is indica…
How to reset the tyre pressure warning light on the Toyota Corolla Hybrid
How to reset the tyre pressure warning light on the Toyota Corolla Hybrid
Toyota Corolla (2019-2026 / MK 5, E210) Below are the steps necessary to reset the tyre pressure warning light on the Toyota Corolla Hybrid; before performing the reset, ensure all four tyr…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos