Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port of the Toyota Corolla located?

Model: Toyota Corolla MK 5, E210 - Years 2019-2026
Part: Dashboard

If you own a Toyota Corolla latest model and want to find out where the OBD port is located to identify and resolve any errors in the ECU, then all you have to do is follow the steps described in the following guide. First of all, reach the driver's seat and for safety reasons make sure the car is turned off. Once you have taken this simple precaution, shift your attention to the lower area of the dashboard and more precisely to the left of the steering wheel. At this point, locate the OBD port of your Toyota Corolla and the procedure is therefore correctly completed.

Posted on 7 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port located in the Toyota Corolla?
Where is the OBD port located in the Toyota Corolla?
Toyota Corolla (2013-2019 / MK 4, E170, E160) The Toyota Corolla features, like all modern cars, the OBD diagnostic port inside. This port is used to connect the car to a diagnostic computer, thr…
Where is the fuse box of the 2012 Toyota Corolla?
Where is the fuse box of the 2012 Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) The 2012 Toyota Corolla has two fuse boxes and an OBD port. The OBD port is located behind a small cover on the left side, specifically under the ste…
How to Activate the Traction Control on a Toyota Corolla?
How to Activate the Traction Control on a Toyota Corolla?
Toyota Corolla (2013-2019 / MK 4, E170, E160) If the TRC OFF light appears on the instrument cluster of the Toyota Corolla, it means that the traction control is deactivated and cannot be reactiv…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos