Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the MMT transmission of the Toyota Corolla?

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Transmission

See other generations:
Video tutorial

To reset the MMT automatic transmission mounted on the Toyota Corolla, you will need to connect a diagnostic tool to the vehicle's OBD port: this will be located on the dashboard just below the steering column. Once this operation has been completed, you can proceed by following the instructions on the screen to clear the errors stored in the transmission control unit: at this point, you can disconnect the scanner and then check that everything is functioning correctly.


Posted on 21 January 2026 by ScegliAuto


Related tutorials

Change Gearbox Oil on Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Today, you will learn how to change the gearbox oil on a Toyota car. We have taken the Toyota Corolla as an example, but the procedure is the same fo…
How to remove the rear bumper from a Toyota Corolla
How to remove the rear bumper from a Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Before you can begin, open the tailgate of the boot on your Toyota Corolla. Start by unscrewing and removing the screws that secure the rear bumper t…
How to Remove the Rear Seat Bench of a Toyota Corolla
How to Remove the Rear Seat Bench of a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Before you can start, open the rear doors of your Toyota Corolla. Begin by inserting a thin, long, and sturdy tool under the rear seat bench. Then, l…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos