Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Dashboard Components of the Toyota Corolla

Model: Toyota Corolla MK 4, E170, E160 - Years 2013-2019
Part: Dashboard

Today, you will see the instructions that will allow you to remove the components of the dashboard of the Toyota Corolla. First, get inside the vehicle and start by removing the plastic side cover of the dashboard; remove the air vents and the plastic covers of the central instrumentation, as shown in the video. At this point, remove the instrument cluster, the radio, and the climate control panel, removing the entire dashboard if necessary; carry out the appropriate repairs or replacements, then reassemble all the dashboard elements in order!

Posted on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Pump on a Toyota Corolla
How to Replace the Fuel Pump on a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) To replace the fuel pump on a Toyota Corolla, unclip the pins located under the rear seat so that it can be lifted to access the components underneat…
How to Replace the Spark Plugs on a Toyota Corolla
How to Replace the Spark Plugs on a Toyota Corolla
Toyota Corolla (2013-2019 / MK 4, E170, E160) To replace the spark plugs on a Toyota Corolla, lift the bonnet to access the components inside. Remove the cover from the top of the engine block to…
Disassembly of the instrument panel of the Toyota Corolla
Disassembly of the instrument panel of the Toyota Corolla
Toyota Corolla (2013-2019 / MK 4, E170, E160) These short and simple instructions will show us how to disassemble and replace the instrument panel of the Toyota Corolla dashboard. First, we get i…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos