Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Instrument Cluster of the Toyota Corolla Dashboard

Model: Toyota Corolla MK 5, E210 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Instrument cluster

See other generations:
Video tutorial

Today, you will see the instructions that will allow you to remove and replace the instrument cluster of the Toyota Corolla dashboard. First, get inside the vehicle and start by removing the plastic cover found on the side of the instrument cluster; then unscrew the fastening screws located on the sides, finally disconnecting the electrical wiring at the back, as shown in the video.

At this point, carry out the repair or replacement of the instrument cluster, installing it correctly on the dashboard, following the video tutorial to the end!


Posted on 4 April 2026 by ScegliAuto


Related tutorials

Removing the Dashboard Components of the Toyota Corolla
Removing the Dashboard Components of the Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) Today, you will see the instructions that will allow you to remove the components of the dashboard of the Toyota Corolla. First, get inside the vehic…
Removing the Radio from the Dashboard of a Toyota Corolla
Removing the Radio from the Dashboard of a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) To remove the radio from a Toyota Corolla, see how to take it out from inside the car's dashboard. Remove the cover under the radio where the air kno…
Disassembly of the instrument panel of the Toyota Corolla
Disassembly of the instrument panel of the Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) These short and simple instructions will show us how to disassemble and replace the instrument panel of the Toyota Corolla dashboard. First, we get i…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos