Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box of the 2012 Toyota Corolla?

Model: Toyota Corolla MK 3 - Years 2006-2013
Part: Fuse box

The 2012 Toyota Corolla has two fuse boxes and an OBD port. The OBD port is located behind a small cover on the left side, specifically under the steering wheel. The first fuse box is situated under the bonnet, near the battery. The second fuse box is located inside the cabin, between the steering wheel and the steering column. To view the fuse boxes, you need to remove the protective covers, which have the amperage and designation of the fuses written on them. To open the box in the engine bay, you need to lift the cover. To access the box in the cabin, you must unclip the lower part of the dashboard.

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located and how to reach it in a Toyota Corolla?
Where is the fuse box located and how to reach it in a Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) Good morning, today's guide aims to discover where the fuse box of our Toyota Corolla is located and how to reach it. Let's start by opening the fron…
Where to Find the Fuse Box of the Toyota Corolla Mk3
Where to Find the Fuse Box of the Toyota Corolla Mk3
Toyota Corolla (2006-2013 / MK 3) In this mini guide for all of you with a Toyota Corolla Mk3, discover where the fuse box containing all the various fuses is located. This way, you w…
Where is the fuse box located in the Toyota Corolla?
Toyota Corolla (2013-2019 / MK 4, E170, E160) The Toyota Corolla has two fuse boxes inside. The first fuse box is located inside the car, specifically under the steering wheel. The second fuse bo…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos