Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light on the Toyota Corolla?

Model: Toyota Corolla MK 5, E210 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

To completely remove the tire pressure sensor of the Toyota Corolla, you will need to adjust the tires to the pressure value indicated on the sticker attached to the driver's side door frame. Once the tires have been inflated, you will need to connect a diagnostic tool to the OBD port of the vehicle.

This port can be found under the steering column. Once the connection is established, you can select the specific model of the car and its corresponding version.

By following the reset procedure, you can disconnect the scanner and then turn off the ignition.


Posted on 20 January 2025 by ScegliAuto


Related tutorials

How do you reset the tire pressure light on the Toyota Corolla?
How do you reset the tire pressure light on the Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) To reset the tire pressure warning light on the Toyota Corolla, you need to inflate the tires until they reach the recommended pressure value: this v…
How to reset the tire pressure light on a Toyota Corolla?
How to reset the tire pressure light on a Toyota Corolla?
Toyota Corolla (2019-2026 / MK 5, E210) To reset the tire pressure warning light on a Toyota Corolla, turn on the instrument panel without starting the engine. Locate the tire pressure rese…
How to Check and Reset the Tyre Pressure Light of the Toyota Corolla
How to Check and Reset the Tyre Pressure Light of the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) In this guide, you will discover how to check and then reset the tyre pressure light of the Toyota Corolla; before registering the TPMS sensors, it i…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos