Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the tire pressure light on the Toyota Corolla?

Model: Toyota Corolla MK 3 - Years 2006-2013
Part:

To reset the tire pressure warning light on the Toyota Corolla, you need to inflate the tires until they reach the recommended pressure value: this value is indicated on the sticker located on the driver's side door pillar. Once the inflation is done, you need to turn on the dashboard by inserting the ignition key into the corresponding slot. At this point, you can press and hold the SET button located on the dashboard below the steering column, to turn off the warning light.

Posted on 14 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Toyota Corolla (2019-2026 / MK 5, E210) The tire pressure warning light that is shown on the instrument panel of the Toyota Corolla can be reset by inflating the tires to the recommended pr…
Toyota Corolla (2006-2013 / MK 3) To reset the tyre pressure warning light on the Toyota Corolla, first inflate the car's tyres to the recommended pressure value: this value is indica…
Toyota Corolla (2013-2019 / MK 4, E170, E160) To reset the tyre pressure light on a Toyota Corolla, first inflate the tyres to the correct pressure: this value is indicated on the sticker attache…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos