Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Battery

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Battery replacement for the Citroen Xsara Picasso
Battery replacement for the Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) The battery of the Citroen Xsara Picasso has run out and does not hold subsequent charging attempts? It's time to replace it. Let's position ourselve…
How to Replace the Battery on a Citroën Xsara Picasso?
How to Replace the Battery on a Citroën Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) To replace the battery on a Citroën Xsara Picasso, loosen the bolts that secure the seat rails at the rear of the driver's seat. This allows the seat…
Replacing the Battery in a Citroen Xsara Picasso
Replacing the Battery in a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Replace the vehicle's power battery? Remove the power battery in a Citroen Xsara Picasso. Open the car door and lift the driver's seat; the battery i…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos