Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara Picasso
    4. : How to remove the third stop in the Citroen Xsara Picasso?

Citroen Xsara Picasso - Video tutorial

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Third brake light
Operation: How to remove the third stop in the Citroen Xsara Picasso?

In this tutorial we can see how to remove the third stop in the Citroen Xsara Picasso, an extremely simple operation, to be carried out for example in case we need to replace a light bulb. First of all, let's make sure that the key is not inserted, then open the boot lid and disengage the internal cover of the headlight in question. Then remove the two fixing screws with a simple cross-tip screwdriver, separate the light from the tailgate and, if necessary, extract the base on which the bulbs are placed. To reassemble everything it will be sufficient to follow the reverse procedure.


Posted on 12 October 2022 by ScegliAuto



Where are the fuses of the Citroen Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) Despite there being only one official model of Citroen Xsara Picasso, the fuse layout is not the same for all cars in this line. In fact, it changes
Replacement headlight bulbs on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Are the Xsara Picasso headlight bulbs burned out and therefore need to be replaced? Let's see how they disassemble. We open the front hood by pulling
How to reset the "Service" light on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before we can start, we will have to go and sit in the driver's seat of our Citroen Xsara Picasso. So let's start by pressing and holding the button

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos