Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Headlamp Bulb on Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Tail light bulb

In this video, you will see how to remove and replace the bulb of the rear headlamp on a Citroen Xsara Picasso. First, open the boot lid and then open the plastic side cover; next, open the carpeted flap and extract the rear light by pushing with something thin. At this point, disconnect the electrical connector of the light and remove the bulb holder from the light itself; remove and replace the faulty bulb if necessary. Finally, reassemble everything, following the video tutorial to the end!

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Rear Light Bulb on Citroen Xsara Picasso
Replacing Rear Light Bulb on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Today, you will learn how to remove and replace the bulb of the rear light (brake bulb) on a Citroen Xsara Picasso in this short video tutorial. Firs…
How to replace the rear light bulb of the Citroen Xsara Picasso.
How to replace the rear light bulb of the Citroen Xsara Picasso.
Citroen Xsara Picasso (1999-2012 / MK 1) If one of the bulbs in the rear light of your Citroen Xsara Picasso has stopped working and you want to find out how to replace it yourself, then all…
Replacing Headlight Bulbs on Citroen Xsara Picasso
Replacing Headlight Bulbs on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Are the front headlight bulbs of your Xsara Picasso blown and need replacing? Here’s how to remove them. Open the front bonnet by pulling the lever l…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos