Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Third Brake Light Bulb on a Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Tail light

Video tutorial

Follow these steps to replace the third brake light bulb on a Citroen Xsara Picasso. First, remove the central rear light.

Use a screwdriver to take off the plastic cap and unscrew the screws inside. Once the light is free from any constraints, disconnect it from the tailgate by detaching the relevant power connectors.

Finally, refit the new light: connect the power connector, insert the light into the tailgate (after fitting the bulbs), and screw in the securing pins. Test the lights to ensure they are functioning correctly.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

Replacing Rear Headlamp Bulb on Citroen Xsara Picasso
Replacing Rear Headlamp Bulb on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) In this video, you will see how to remove and replace the bulb of the rear headlamp on a Citroen Xsara Picasso. First, open the boot lid and then ope…
How to replace the rear light bulb of the Citroen Xsara Picasso.
How to replace the rear light bulb of the Citroen Xsara Picasso.
Citroen Xsara Picasso (1999-2012 / MK 1) If one of the bulbs in the rear light of your Citroen Xsara Picasso has stopped working and you want to find out how to replace it yourself, then all…
How to dismantle the third brake light on the Citroen Xsara Picasso?
How to dismantle the third brake light on the Citroen Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) In this tutorial, we can see how to dismantle the third brake light on the Citroen Xsara Picasso, a very simple operation, for example, if we need to…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos