Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Headlight Bulbs on Citroen Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Light bulb

Replace damaged front headlight bulbs on a Xsara Picasso? Here’s how to change the bulbs. Open the bonnet of the engine compartment and secure it; detach the plastic cover (central cap) behind the front headlight and remove it from its housing. Disconnect the bulb holder and replace the damaged front headlight bulbs (matching size and voltage). After replacing the damaged bulb, refit the cap by pressing it back into place. Repeat the same operation on the other front headlight if you need to change the bulbs. Turn on the switches for the operation of the front headlight bulbs.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Headlight Bulbs on Citroen Xsara Picasso
Replacing Headlight Bulbs on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Are the front headlight bulbs of your Xsara Picasso blown and need replacing? Here’s how to remove them. Open the front bonnet by pulling the lever l…
How to Replace the Front Headlamp Bulbs on a Citroen Xsara Picasso?
How to Replace the Front Headlamp Bulbs on a Citroen Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) In this tutorial, you will see how to replace the front headlamp bulbs on a Citroen Xsara Picasso, a very simple and quick operation. Before proceedi…
Replacing the Headlight Bulbs on a Citroen Xsara Picasso
Replacing the Headlight Bulbs on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Are the headlight bulbs blown? Let's see how to disassemble them on a Citroen Xsara Picasso. Open the engine bonnet by pulling the lever located at t…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos